RAY G3 Brushless motor C3536-1000

RAY G3 motors are powerful brushless (“brushless”) fourteen-pole rotary casing motors (“outrunner”) with excellent electrical properties, sophisticated design and excellent manufacturing. They are a very good choice for driving your recreational and sports models with excellent performance, good efficiency and good price. These are high-torque, low-torque, large-diameter propellers and gearless climbs.

Engine Labeling System: CxxYY-zzzz
C – rotary casing brushless motor (“outrunner”, “circular”)
xx – motor diameter in mm
YY – motor length in mm
zzzz – revolutions per volt (rpm), “KV”
The RAY G3 C3536-1000 is a brushless motor designed to drive models with a flight weight of up to 1700 g with power from a three-cell or four-cell Li-poly battery. Perfect for models such as our FOX 2300, Multiplex Fun Cub, Solius, Heron, Bellanca Decathlon EP 1300 mm from Phoenix, a two meter thermal glider, and so on.

Engine Mounting: RAY G3 C3536-1000 is designed for both front and rear mounting. For front mounting behind the engine, use four M3 bolts that engage 4-5 mm in the engine face. The pairs of mounting bolts for the bolts at the front of the engine are regularly spaced 180 ° on circles of 25 and 19 mm diameter. The engine bulkhead should be 4 mm plywood plywood. The rear mounting kit (mounting cross, propeller carrier for rear flange) is supplied with the engine.

Engine kit includes: C3536-1000 engine with cables with soldered 3.5 mm gold plated connectors, rear mounting kit, instructions.

Powering LiXX cells 3 – 4
Speed per Volt [rpm] min / V] 1000
Max. Power (30 sec / 4S LiPo) [W] 37
No-load current (3S) [A] 1.4
Max. peak current (30 s) [A] 33
Diameter [mm] 35
Length [mm] 36
Shaft Diameter [mm] 4
Weight [g] 110
Number of poles 14
Timing [°] 15-25
Controller [A] 40-45
Glider to weight [g] 1700
Coach to Weight [g] 1600
Acrobat up to weight [g] 1300
3D to weight [g] 1050
Recommended Propeller 3S: 12×6 ”
4S: 10×5-6 ”