FMS Ranger V2 PNP green red yellow – 122cm with reflex gyro

The FMS Ranger V2 is a trainer model with a 122cm wingspan. Constructed from ultralight EPO foam, it offers exceptional lift even at low speeds with an extremely low wing loading. Robust plastic struts provide additional strength to the wings during aerobatic maneuvers, and the high-strength tricycle landing gear makes handling on the ground a breeze.

Reliable Power System: A great aircraft naturally needs a great and, above all, reliable power system. FMS has equipped the Ranger with a 1200KV outrunner motor on a Predator 20A ESC, allowing the Ranger to fly vertically on 3S if necessary.

Fast assembly: Only 6 screws (landing gear) or 10 (floats) are required to fully assemble the model. The model can be assembled faster than charging the battery.

Including FMS Reflex V3 stabilization system This model includes a specially programmed FMS Reflex system. This electronic stabilization system is designed to support the pilot’s control commands without interfering with them. The Reflex system operates with both PPM and SBUS inputs and works natively with all common remote control systems. When the Reflex system is assigned to a 3-channel switch, you can choose between 3 different modes: • Stabilized mode: When you release the control sticks, the model is automatically brought into a neutral flight position, which offers beginners and inexperienced pilots a lot of safety in dangerous situations. • Optimized mode: The gyro system of the Reflex system counteracts external influences such as gusts of wind or crosswinds and keeps the model precisely in a stable position. • Off: The Reflex System can be switched off completely. The FMS Reflex System is specifically configured for this model aircraft. No further programming is required. The FMS Reflex System can be bound to any receiver with at least four channels.

Characteristics: • Reflex V3 stabilization system with gyro (compatible with all receivers with at least 4 channels) included in delivery • Construction made of robust EPO rigid foam material • powerful brushless motor, high-performance controller and 5 servos built in • including metal chassis • including 2-blade propeller 10×5“ • about 10-15 minutes flight time with 3S 1200mAh LiPo battery • One-piece elevator for precise flight characteristics • fully painted • Assembly of the model in 3-10 minutes • including richly illustrated assembly instructions (German and English)

Technical data: • Wingspan: 1220 mm • Length: 947 mm • Flying weight: approx. 1200 g • Area: 25.4 dm² • Surface load: 39.4 g/dm² • Motor: Brushless 3136-KV1200 • Controller: Brushless 20A • Servos: 4x 9g

Required accessories: • Remote control: at least 4 channels • Receiver: at least 4 channels • Battery: 3S LiPo 1300mAh 25C • LiPo charger