JET RULER 1.8M F16 PRE WIRED VERSION WITH LIGHTS INSTALLED

JET RULER 1.8M F16

JET Ruler is very pleased to announce the production of what is one of aviations most epic aircraft ever, the General Dynamics F16 Fighting Falcon.

We wanted this one to go above and beyond as a beautiful scale model. We found ways to make it reliable and tough enough to actually be flown on a regular basis, and not a problem to transport or put together, all in a package that fly’s brilliantly well.

This 1/8 scale version has been designed with an improved wing area, to provide better performance and flight characteristics.

SPECIFICATIONS:

Model: 1.8M  F16

Wingspan: 52.9″ (1344mm)

Length: 71.3″ (1810mm) – Plus pitot tube

Weight: 17.8lbs (7.85kg)

BASIC SETUP:

Control throws:

Aileron: 10mm up / 10mm down – 40% Expo

Measured from the wingtip

Rudder: 35mm left / 35mm right – 50% Expo

Elevator: 40mm up / 40mm down – 45% Expo

Measured from the front of the leading edge of the elevator.

The CG is 148mm from the front leading edge on the root of the wing (Factory Settings)

FEATURES:

Full composite construction, lightweight and strong

Painted outside the mold so no seam lines

Easily detachable ventral fins, helps in place with just two screws

INCLUDED HARDWARE:

Complete air frame (including fibreglass control horns)

Carbon fibre wing-tubes

Servo extension leads

Fixed Dual wall thrust pipe (for 60-100N turbines)

Fuel tank (2000ml)

Pre-prepared pushrods with ball links

Pre-glued control horns

OPTIONAL EXTRAS:

Simulate fighter cockpit

Light system

PNP and installation service

REQUIRED HARDWARE:

Turbine: 60-100N

Servos: x9

x5 middle size servo, 35 x 15 x 30mm (minimum 16kg) // Uses x1 per aileron, x1 per elevator, x1 on rudder

x4 middle size servo, 35 x 15 x 30mm (minimum 10kg) // Uses x3 for gear doors and x1 for steering

Also requires all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories.