FMS Ranger V2 PNP red – 122cm mit Reflex Gyro

The FMS Ranger V2 is a trainer model with a 122cm wingspan. Constructed from ultralight EPO rigid foam, it offers exceptional lift even at slow speeds with an extremely low wing loading. Robust plastic struts provide additional wing rigidity during aerobatic maneuvers, and the high-strength tricycle landing gear makes ground handling effortless.

Reliable Propulsion: A great aircraft naturally needs a great and, above all, reliable propulsion system. FMS has equipped the Ranger with a 1200KV outrunner motor on a Predator 20A ESC, enabling the Ranger to climb vertically on a 3S battery when needed.

Quick assembly: Only 6 screws (landing gear) or 10 screws (floats) are required for complete assembly of the model. The model can be assembled faster than the battery can be charged.

Including FMS Reflex V3 stabilization system This model comes with an FMS Reflex system specifically programmed for this aircraft. This electronic stabilization system is designed to assist the pilot with control inputs without interfering with them. The Reflex system works with both PPM and SBUS inputs and is natively compatible with all common radio control systems. When the Reflex system is connected to a 3-channel switch, three different modes can be selected: • Stabilized Mode: When the control sticks are released, the model is automatically brought into a neutral flight position, which offers beginners and inexperienced pilots a great deal of safety in critical situations. • Optimized Mode: The gyro system of the Reflex system counteracts external influences such as gusts of wind or crosswinds and keeps the model precisely in a stable position. • Off: The Reflex System can be completely switched off. The FMS Reflex system is specifically configured for this aircraft model. No further programming is required. The FMS Reflex system can be bound to any receiver with at least 4 channels.

Characteristics: • Reflex V3 stabilization system with gyro (compatible with all receivers with at least 4 channels) included in the scope of delivery • Construction made of robust EPO rigid foam material • Powerful brushless motor, high-performance controller and 5 servos built-in • including metal chassis • including 2-blade propeller 10×5″ • Approximately 10-15 minutes flight time with a 3S 1200mAh LiPo battery • One-piece elevator for precise flight characteristics • finished paint • Model assembly in 3-10 minutes • Includes richly illustrated assembly instructions (German and English)

Technical data: • Wingspan: 1220 mm • Length: 947 mm • Flying weight: approx. 1200 g • Area: 25.4 dm² • Surface loading: 39.4 g/dm² • Motor: Brushless 3136-KV1200 • Rules: Brushless 20A • Servos: 4x 9g

Required accessories: • Remote control: min. 4 channels • Receiver: min. 4 channels • Battery: 3S LiPo 1300mAh 25C • LiPo charger