AMXFLIGHT TURBO BUSHMASTER 1830MM STOL PNP

Scale plane with 1830mm wingspan and excellent flight characteristics, which appeals to both ambitious beginners and experienced modellers. With the exclusive SIBA design, this is a real rarity, which is only available in this form from the AMXFlight brand. The technical equipment is also of particularly high quality: a powerful brushless motor (5015 / 550KV) with a thrust/weight ratio of approx. 2:1 and large control surfaces on the wings, elevator and rudder make the model a 3D aerobatic trainer with excellent slow flight and STOL (short take-off and landing) characteristics. For this purpose, the plane was equipped with huge pneumatic tyres (125mm) at the factory. The air pressure can be adjusted to your own needs with the enclosed valve needle. This means that the Turbo Bushmaster can be used on almost any surface. Due to the brute power, a take-off distance of only a few metres is sufficient. The ready-mounted landing flaps can also be controlled as ailerons via a mixer on the transmitter (the control surface of the ailerons is almost doubled), which significantly increases the manoeuvrability and aerobatic characteristics. The ESC (Hobbywing 80A / 5V 8A UBEC) ensures good response in every position, while the precise digital servos with metal gears provide optimum control. The main wing is in two parts and can be easily dismantled for transport. Last but not least, the Turbo Bushmaster has been equipped as standard with very bright LED night flight lighting in the wings and fuselage (illuminated from inside), which can be switched from the transmitter.

Highlights:
Oversized pneumatic tyres: With very good suspension and elasticity for hard take-offs and landings even on uneven terrain (STOL-capable).
All components already installed: Motor, controller, LED lighting, servos
Mixable ailerons and flaps: ensures extreme manoeuvrability in flight

More features:
Unique, exclusive and highly visible SIBA design
Lightweight yet robust composite-reinforced EPO
Large wings and highly effective flaps for short take-offs and landings (STOL-capable) as well as a high degree of aerobatic capability
Propulsion designed for 6S LiPo batteries between 3000 – 4000mAh for a wide range of performance and flight time

Technical data:
Wingspan: 1830mm
Length: 1330mm
Wing loading: 68.5g/dm²
Wing area: 43.2dm²
Weight: approx. 2685g ready to fly (depending on battery size)
Main material: EPO foam, high strength
Thrust: over approx. 2:1
Motor: 5015 / 550kv
ESC: 80A Hobbywing, 5V / 8A UBEC, XT90 connector
Propeller: 15 x 7 / 2-blade wood
Servos: 2x 25g digital, 4x 19g digital
Building time: approx. 30min

Scope of delivery:
PNP model
Small parts for bolting and linkage
Instruction manual DE/EN

Required accessories:
Transmitter and receiver min. six channels (recommended: min. 6-channel computer transmitter)
LiPo battery 3000 – 4000mAh 6S with XT90 connector
Charger for drive battery